Mining is the extraction of valuable minerals or other geological materials from the earth, usually (but not always) from an ore body, vein, or (coal) seam. Materials recovered by mining include bauxite, coal, copper, gold, silver, diamonds, iron, precious metals, lead, limestone, nickel, phosphate, oil shale, rock salt, tin, uranium, and molybdenum. Any material that cannot be grown from agricultural processes, or created artificially in a laboratory or factory, is usually mined. Mining in a wider sense can also include extraction of petroleum, natural gas, and even water.

Drilling is the process of using a drill bit in a drill to produce cylindrical holes in solid materials.

Drilling in metal

Under normal usage, swarf is carried up and away from the tip of the drill bit by the fluting. The continued production of chips from the cutting edges produces more chips which continue the movement of the chips outwards from the hole. This continues until the chips pack too tightly, either because of deeper than normal holes or insufficient backing off (removing the drill slightly or totally from the hole while drilling). Lubricants and coolants (i.e. cutting fluid) are sometimes used to ease this problem and to prolong the tools life by cooling and lubricating the tip and chip flow. Coolant is introduced via holes through the drill shank (see gun drill bits).

Straight fluting is used for copper or brass, as this exhibits less tendency to "dig in" or grab the material. If a helical drill (twist drill) is used then the same effect can be achieved by stoning a small flat parallel with the axis of the drill bit.

For heavy feeds and comparatively deep holes oil-hole drills can be used, with a lubricant pumped to the drill head through a small hole in the bit and flowing out along the fluting. A conventional drill press arrangement can be used in oil well drilling, but is more commonly seen in automatic drilling machinery in which it is the workpiece that rotates rather than the drill bit.